|
ARTIFICIAL GRASS PLAYGROUND
SAFETY SURFACING
This
versatile and attractive surface provides an economic alternative
to conventional rubber tiles or wetpour. The soft and springy
feel is friendly and inviting and has proved to be of added play
value in itself.
It comprises one or more layers
of recylced impact absorbing polyethylene foam matting, covered
by a sandfilled artificial grass carpet.
The matting is made of waste, polyethylene foam, which is chipped
and heat bonded (no adhesives) to form a durable, free draining
and highly effective impact absorbing material. The foam's closed
cell construction utilises trapped cells of air to produce a
springy, cushioned surface which does not compress, even after
prolonged use, and is virtually unaffected by temperature.
The sandfilled artificial grass surface is hard
wearing, resistant to cutting and burning (classified as low
radius of ignition according to BS 4790) non-slip and is both
attractive and natural looking. Alternative colours and patterns
are available if required. The flexible nature of the materials
enables it to be installed to suit the natural contours of the
surrounding areas.
The versatility of the system
enables the formation of traditional playgrounds, small kickabout,
or general play areas (without equipment) with no need for a
base. (subject to suitable ground conditions)
Standard Critical Fall Heights and approximate prices and thicknesses
are as follows. (CFH tested in accordance with BS 7188)
Prices exclude additional
base and drainage (where
required). Exact prices depend on quantity and location, etc.
|
1. |
Approximately 58 mm |
CFH 1.5 m |
from £40.00/m2 |
|
|
2. |
Approximately 96 mm |
CFH 3.0 m |
from £60.00/m2 |
|
Maintenance involves sweeping to keep clear of
debris and dirt, (hosing down if preferred) and topping up with
silver sand annually. Repairs can be undertaken quickly and easily
should they be necessary.
Other Surfaces We Offer:
-
Rubber tiles (1 m x 1 m) are available from 20
mm to 100 mm thick (black, red, green, flecked colours).
Rubaflex wet pour rubber (insitu) surfacing is available in
a variety of colours from 15mm to 110mm thick.
We also undertake playground
construction and play equipment erection. |